In "Customizing/setting data file", you can use the data file to specify the processing contents in a fixed manner.
The command line specification allows you to more flexibly specify the initial state, processing content, etc.

Initially, the data file settings take precedence over the command line settings.
This is from the idea of preventing users from being able to change it freely on the command line.
Which one to prioritize can be changed by "Overwritten by command line" in the data file.

Details of command line options

The command line options are as follows.
For individual meanings and screen display when set, see "Customizing/Setting data file".

Item	Settings	Description
Data file	/D:[data file]	Specify the data file. If the data file name contains spaces, enclose it in "" (double quotation marks).
Fixed Erase method, Auto erase	/A:D	Specify fixed erase method
	/A:P[password]	Auto erase with password
	/A:A	Full-auto erase
	ex. /A:P1234   Auto erase with password, using password "1234".
Erase method	/M:[1,2,3,4][6,7,8][E][L][H][N][V][v]	1-4: Number of erasures, 1-4 times 6-8: Secure Erase, 1-3 times       (If not specified, it will be "--- not selected ---". ') E: Stop when error L: Write log to FD/USB flash drive H: Write log to HDD N: Write log to network share V: Verify  v: Verify(Secure Erase)
	/S:[1,2,3,4][6,7,8][V][v]	/S If specified, "Enable SSD configuration" 1-4: Number of erasures, 1-4 times 6-8: Secure Erase, 1-3 times       (If not specified, it will be "--- not selected ---". ') V: Verify  v: Verify(Secure Erase)
	ex. /A:D /M:3VH    Fixed erase method. Erase 3times, Verify, Log(HDD). /A:Ppass /M:16LHVv    Auto erase with password(pass), erase 1time, Log(USB stick,HDD), Verify, Secure erase 1time, Verify. SSD configuration not specified.
USB flash drive, Config type	/U:[H][F][2]	H: HDD type F: Large FDD type 2: Limit to 2G
	ex. /U:H Set to HDD type
Language	/L:[en,jp]	en: English jp: Japanese
	ex. /L:jp    Set language to Japanese
Options	/O:[U][P][S][H][V][E][T][D]	U: Erase USB drives of 64G or less P: Disable ACPI S0: SecureErase/Sanitize menu: Auto       S1: Show always  S2:Never show H: Disable HPA, erase entire disk V: UEFI- use old memory mapping E: UEFI- disable runtime T: UEFI/HDD- boot text console D: Add compliant std to log
	ex. /O:HS1    Disable HPA, Show Secure Erase menu always.
Additional info	/N:title1,0/1,title2,0/1	Specify the following separated by commas Item1 title text (space character should be replaced by "_" underscore) 1 if specify input required, 0 otherwise Item2 title text (space character should be replaced by "_" underscore) 1 if specify input required, 0 otherwise
	ex. /N:Operater,1,PC_Number,0        Set "Operator" as a required input item and "PC Number" as an optional input item
Display page	/T:[H][U][C][P][S]	The specified page is displayed H: HDD boot U: USB stick C: CD image P: WinPE config file S: Data file The first specified page will be the initial display page.
	/T:H     Display only "HDD boot" page /T:CU   Display "USB stick","CD image" page.  Set the initial display page to the "CD image" page.
Fixed value	/F	If specified, the value will be fixed. Cannot be changed.
Module configuration file	/J:[file path]	Specify the module configuration file to use. If the file path contains spaces, enclose it in "" (double quotation marks).
Network specifications
Enable writing log to Network Storage	/NE	Enabled if specified
IP address	/NI:D /NI:I[x.x.x.x,x.x.x.x,x.x.x.x ,x.x.x.x]	D: DHCP I: Specify fixed value (IP,subnetmask, default gateway, nameserver) (Gateway and name server can be omitted)
	ex. /NI:D    DHCP /NI:I192.168.0.10,255.255.255.0,192.168.0.1             IP:192.168.0.10, netmask: 255.255.255.0, gateway: 192.168.0.1
Protocol	/NW:[W][F]	W: Windows share (SMB/CIFS) F: FTP
	ex. /NW:W   Windows share
Storage Serevr	/NV:[x.x.x.x] /NV:[server name]	Specify IP address of the server, or server name
	ex. /NV:192.168.0.5        Specify server address 192.168.0.5
Share (WIN)	/NS:[share name]	Specify share name
	ex. /NS:TEST    Specify share name TEST
Directory	/ND:[directory]	Specify directory name. If the directory name contains spaces , enclose in "" (double quotation marks).  (WIN only)
	ex. /ND:gplog/2012   Specify directory name "gplog/2012"
Account	/NU:[account]	Specify the account/authentication ID
	ex. /NU:nomura
Password	/NP:[password]	Specify password (plain text)
	/NP:password
Password(encrypted)	/NC:[encrypt password]	Specify the encrypted password * Please contact us for information on  how to create an encrypted password.
Log file name prefix	/NX:[0-3](fixed value)	0: none 1[fixed value]: fixed value 2:"additional info1" input value 3:"additional info2" input value
	ex. /NX:1GP    Specify fixed value "GP" /NX:2        Specify input value of "additional info1"
Network (Wi-Fi) specifications
Enable Wi-Fi	/WE	Enabled if specified
SSID	/WS:[SSID]	Specify SSID
Encryption	/WA:[W/P/E]	W:WEP P:WPA/WPA2-PSK E:WPA/WPA2-EAP
Key(WEP/PSK)	/WK:"[text]" /WK:[hex key]	Specify the authentication key for WEP, WPA / WPA2-PSK. Enclose in double quotes for text. For hexadecimal, specify without double quotation.
	ex. /WK:"WPAPSKKEY"  Specify key in text, "WPAPSKKEY" /WK:0506AF4D5DD0B33E  Specify key in hexadecimal, 0506AF4D5DD0B33E
Auth ID(EAP)	/WU:[authentication ID]	Specify authentication ID for WPA/WPA2-EAP.
Password(EAP)	/WP:[password]	Specify password (plain text) for WPA/WPA2-EAP
Password(encrypted)	/WC:[encrypt password]	Specify encrypted password for WPA/WPA2-EAP. * Please contact us for information on  how to create an encrypted password.